Economic Model Corrugated Carton Flexo Printer Rotary Die Cutter
Machine For Pizza Box
1.printer slotter phase :electric number digital adjust
2. auto ink circulation system
3. Touch screen on feeding unit
4.The gear of the machine: Auto lubrication with oil
5.Machine body thickness:50mm
6.automatic seperated, pneumatic lock up.
- Automatic suction lead edge feeder equipped with a 7.5kw suction
fan to feeding cardboard, the blowing rate is adjustable by the
transducer according to the degree of crook of cardboard in order
to transmit cardboard smoothly.
- The main control pannel is composed of control buttons and touch
screen, which is very convenient and reliable.
- The machine is launched by pressing the start button with two
hands, which ensure the operator's safety.
- The side plate is electrical adjusted automatically while the
backstop is adjusted manually.
- Sheet cleaner is equipped to remove the contaminants on the
cardboard which will improves the printing quality.
- The upper transmission roll is made of seamless steel tube, the
surface is covered wearproof rubber, which is also good at avoiding
crushing the cardboard.
- The lower transmission roll is made of seamless steel tube, with
the treatment of grinding, embossing, and chrome plated.
- The transmission between the upper and lower transmission roll is
driven by double slider coupling, which is good at reducing wear
down and transmitting smoothly.
- The transmission shaft equipped with electromagnetic friction
clutch, for avoiding damaging the motor in case of misoperation or
- Automatic counter for recording the cardboard supply quantity to
show the output.
- All the rolls and shafts are made of high quality steel, with the
treatment of dynamic balance correction, grinding and chrome
- The printing phase position is and horizontal movement controlled
automatically by touch screen with digital display, the phase
position could be adjusted CW or CCW easily with 360 degree because
of the equipping of PLC and planetary gearing mechanism.
- Equipped with ink quantity monitoring system, the machine will
alarm when out of ink, and stop feeding cardboard.
- The printing plate is hanged by the hanging plate device, the
printing roll is able to clockwise rotate and counter clockwise
rotate which controlled by the foot switch, it's very convenient
for installation and dismounting of printing plate.
- Manual gap adjustment via worm reducer with graduated dial
indication such as gap between rubber roll and anilox roll, gap
between anilox roll and printing roll etc.
- Equipped with electromagnetic clutch break system to fix the
printing phase, when separate the printing unit for adjusting the
printing phase, the break system will prevent the gear move, keep
the original position.
- Phase clear memory and reset after printing plate cleaning.
- The distributing rubber roll is covered by wear proof rubber, it's
good at ink transmission.
- Steel anilox roll with the treatment of grinding, pressing
overlapping curve and chrome plated.
4. Slotter unit
- Gear enclosed spray lubrication system, keyless drive design, so
that accurate long-term chromatic unchanged. High Speed Flexo
Printing Slotting(stacking Unit)
- Phase institutions is 360-degree Electric adjustment, ergonomic
- Four-blade sync adjustment for carton height.
- Serrated slotted cutter. Thickness: 7mm.
5. Die-cutter unit:
- Die-cutting roller adopt high quality casting material, thickness
is 30 mm, with good quality and dynamic balancing correction, hard
- Main body wallboard adopt high quality cast iron material, wall
thickness is 50 mm,processing by large-scale machining center.
- Soft roller automatically repair institutions improve gluesheath of
repeated use, can repair 3-4 times
- Linear speed automatic compensation, to ensure that each batch of
carton die-cutting size exactly.
- Imported Taiwan super resistant polyurethane rubber gasket,
convenient installation, the die cutting times can up to 120
- Six levels of fine grinding gear using 40 cr material, low noise,
long service life.
- Die-cutting roller cylinder type auto separation unit, decrease
adhesive wear of gluesheath (controlled by photoelectric).
- Lubrication system, adopting the mechanical pump oil supply device,
automatic spray the circulating oil,lubricate evenly, improve the
service life of gear.
- Combined slotter blades, can option do slotter job.
6. Technological parameter
|Wallboard medial width||2800mm|
|The diameter of the anilox||450 mm|
|Max feeding paperboard size||1400 mm * 2600 mm|
|Max effective printing size||1400 mm * 2400 mm|
|Min process paperboard size||450 mm * 550 mm|
|Thickness of the printing plank||7.2 mm|
|design speed||120pieces / min|
|economical speed||100 pieces / min|
|Precision of the printing||±0. 75 mm|
|Printing rolling axle circle-oriented regulating||360 degree revolving|
|Printing rolling axle-oriented regulating||+/-10mm|
1. Q: Are you a factory or trading company?
A: We are manufacturer. Our factory is HRB PACK GROUP CO.,LTD-
Carton Box Machinery Manufacturer in China.
2. Q: Where is your company located? How can I visit there?
A: Our company is located in Dongguang County,Cangzhou City,Hebei
Province. We are near from Beijing/Tianjin city 2/4 hours,We can
arrange car to pick up from airport or hotel.
3. Q: Do you have any working machine for us to visit?
A: Yes,We have running machine near our factory also in our city,
we can arrange visitation.
4. Q: How is the warranty of the machine?
A: Our machines have ONE YEAR WARRANTY. And the engineers available
for overseas service.
5. Q:Is it safe on the payment for me as we are the first
A: We can do the trade assurance on Alibaba, which will guarantee
your products receiving, we also accept other safe payment way as